Saturday, May 16, 2015

How to Fix the Window on a Mitsubishi Endeavor

How to Fix the Window on a Mitsubishi Endeavor

Unforeseen repairs for your vehicle can be a stressor, but you can repair one type of damage without letting it get to you. Cracks along the windows of your Mitsubishi Endeavor can occur for any reason. But you can turn this into a do-it-yourself job with the proper tools and a little time.

Instructions

    1

    Combine soap and water to make your cleaning solution. Wash the window to remove as much dirt as possible.

    2

    Remove glass from within the cracks. With your safety goggles on, use the corner of the razor blade to pick the pieces out. A clean surface will produce the best repair.

    3

    Attach the suction stabilizer to the window with the damage directly underneath the suction cup.

    4

    Put the plastic injector into the injector port on the stabilizer, and then put the resin tube into the injector. Once in place, remove the injector. This will allow the suction to begin, pulling the resin out of the tube and into the damage for repair.

    5

    Take the stabilizer off the window. Prepare a few strips of curing film by cutting them down to size. Place them over the resin and pull them off when the resin has dried.

Related Posts by Categories

0 comments:

Post a Comment